metal slitting machine manufacturer to explain to you the performance and technical parameters of metal slitting machine.

1. Main performance

From the performance characteristics of metal slitting machine equipment analysis, the equipment actually has a variety of functions, which at the same time set the functions of laminating, slitting, rewinding and so on.

Therefore, for many customers, choosing this device can reduce the capital investment of buying multiple machines. At the same time, in the process of using the device, it can also reduce the labor cost caused by multiple people.

In order to meet the requirements of different users, this metal slitting machine equipment is also particularly flexible, which uses the upper and lower round knife cutting method, and the user can choose a straight knife or an air knife, which is very convenient. The winding of the equipment belongs to the upper and lower single-axis swing arm winding, adopts high precision gas sensitive correction, and is equipped with an independent discharge rack device. In addition, the receiving/discharging shaft of the equipment is controlled by magnetic powder clutch, the host adopts frequency conversion speed regulation, and the middle guide shaft is a high-precision aluminum alloy optical shaft.

2. Technical parameters of slitting machine equipment

The metal slitting machine can be used to cut different types of materials, such as film, paper and foam. Secondly, under normal operation, the mechanical speed of the device can reach 120 meters per minute, and the cutting speed can reach 5 to 100 meters per minute. The larger width of the machined material is 1300 mm.

During normal operation, the total power of the equipment is 7KW. This metal slitting machine device has a larger winding diameter of up to 1000 mm, a larger winding diameter of 350, and a slitting accuracy of ±0.1.

metal slitter operation precautions

metal slitter summer maintenance precautions

Structural composition and cleaning of metal slitting machine

metal slitter test machine pay attention to problems

Steps to buy metal slitting machine