metal slitter must pay attention to maintenance, then how to maintain it? Today, metal slitter is here to talk about it.

　　1. In the process of using the slitter machine, proper lubrication care is very important. Due to the different use conditions, the lubrication requirements of different parts are also different. For example, for discharge seats and plain bearings, lubrication care is usually carried out every three days, and after adding butter, it is also necessary to move left and right to ensure adequate lubrication.

　　2. For the plain bearing of the discharge shaft pressing plate of the slitter equipment, the grease gun is usually used once a week when lubricating care is carried out. Remember, before refueling, you also need to clean the refueling area to avoid contaminating the oil.

　　3. The brake system of the equipment should also pay attention to lubrication care. The brake connection part also needs to be moved back and forth several times after adding lubricating oil to ensure adequate lubrication. Usually for this part should be lubricated three times a week, and pay attention to cleaning.

　　4. For the roller and adjustment parts of the slitter equipment, the corresponding adjustment should be made according to the actual situation. When filling lubricating oil, attention should be paid to keeping it clean, usually lubricating it three times a week. In addition, for the adjustment of the upper and lower knives, such as worm gear and worm also need to be lubricated three times a week, pay attention to cleaning.

　　5. The clutch of metal slitter's lower tool shaft also needs to be lubricated three times a week and kept clean. Also pay attention to butter the scrap coiling support shaft three times a week, and move the mechanism from side to side several times.

　　The role of looping in Slitting machine composition equipment

　　Manual slitting machine Common problems and solutions

　　The correct installation of the Slitting machine blade

　　Factors that affect the productivity of Automatic slitting machine

　　hydraulic slitting machine system how to disassemble