How are metal slitter blades selected and installed? Come and learn together!

The blades of metal slitter equipment also need to have good toughness to minimize the occurrence of chipping, and the surface finish of the blades must be high, usually requiring fine grinding to achieve. Of course, these are comprehensive considerations in terms of cost, efficiency and quality. The most ideal state is to further improve the quality and service life of the blade without increasing the cost.

For example, if the thickness of the processed sheet is between three millimeters and seven millimeters, and the daily processing amount is relatively large, then the blade quality requirements for the slitter equipment are relatively high. In general, the hardness requirements for the blade should be above 65HRC. Secondly, it has good wear resistance, otherwise frequent tool changes will be required in production. This will inevitably affect the production quality and production efficiency.

The meaning of the slitting actually refers to the longitudinal cutting of the steel plate, so that the width of the steel plate changes, such as: the width of the steel plate is 100 mm cut into two plates with a width of 50 mm. At this time, you need to use the slitter equipment. In this equipment, it is clear that the blade plays a crucial role.

In actual work, if it is found that there are more obvious burrs on the cut of the plate after cutting, it means that the tool has appeared greater wear, which has affected the quality of the cutting. In view of this situation, the user needs to replace the new qualified slitter blade in time. When installing the blade, it should be carried out according to the actual size needed.

metal slitter operation precautions

metal slitter summer maintenance precautions

Structural composition and cleaning of metal slitting machine

metal slitter test machine pay attention to problems

Steps to buy metal slitting machine