News

The leveling machine is currently very popular with steel plate processing manufacturers for a series of processing equipment such as uncoiling, leveling and shearing of metal steel plates. The leveler integrates electro-hydraulic and has a certain degree of energy-saving effect.

The steel plate leveler is an important equipment on the uncoiling line. The number of shear strokes of the steel plate leveler determines the productivity of the uncoiling line to a large extent.

The slitting machine is also known as the slitting line, which is used to make the metal coil into a coil of the required width through the processes of uncoiling, slitting, and rewinding. The slitting machine is suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and various metal materials after surface coating.

I believe many users are familiar with slitting machines. The rotation accuracy of the cutter shaft of the slitting machine is a key factor to ensure the cutting accuracy and quality of the metal plate, which is a very important issue.

In the process of processing the sheet by the slitting machine, sometimes various marks will appear on the surface of the sheet. So how did these traces come about?

Sometimes knife marks and take-up scratches occur during the processing of the slitting machine. Today, Bangzhou is here to introduce to you the reasons for knife marks in slitting machine processing.