The reason for the sickle bend in the production of slitting line machine
In the CNC slitting industry, many machines sometimes have some malfunctions that affect the operation. After the malfunction, we should first find the cause of the malfunction and then look for measures to deal with the malfunction.In these machines, the slitting line machine has a big sickle bend phenomenon during slitting, which means that the material appears to be bent laterally after slitting. Today we will analyze the occurrence the reason for this phenomenon.
(1) In the rolling process, the stress of the material is not completely eliminated. When the stress is released to both sides, the two sides of the material are bent.
(2) If the blade gap is not adjusted properly, and there are burrs on the edge of the material, then the edge will bend.
(3) If the tension is uneven, but concentrated on one side, it will also cause bending.
(4) The moving speed of the correction device is too fast, then the part in contact with the device will bend.
The above four points are the reason why the slitting line machine has a big sickle when slitting. I hope it will be helpful to everyone. What we have to do in actual production is to make a deep summary after each malfunction is dealt with. Only in this way can we accumulate experience day by day.
Bangzhou Machinery is a company specialized in slitting line machine, cut to length line and so on. We are professional in designing and producing all kinds plates processing machines. We have the high quality slitting line for sale, and we will do our best to build the machine you want. Welcome to your inquiry!
Related news:
- 4-12x2000 automatic cut to length line sent to Tunisia
- Inspection work before starting the slitting line
- Slitting process of slitting line machine
- 4x1600 cut to length line sent to Thailand is loading
- Indian guest slitting and CTL line contract
- Two commonly used transmission modes for slitting line machine