We know that in the process of slitting, the precision requirements for slitting line machine are getting higher and higher. If you want to meet the accuracy requirements, you must ensure good slitting quality. What can be called a good cutting quality?

In fact, as far as the slitting line machine is concerned, it is not the complete cutting of the material, but the cutting result that both the shear surface and the fracture surface exist. Such a situation is a good cutting. This cutting quality can not only ensure product accuracy, but also reduce tool wear and extend the service life of the slitting line machine. In order to achieve this requirement, not only must pay attention to the control of each gap, but also select a suitable pressure plate at the cutting point.

We know that the cutting resistance at the cutting point will cause the material to bend, twist and deform. Not only that, in this area, the pickling plate slitting and rewinding disc cutter can prevent the electroplated terminal material from being scratched. Therefore, it is necessary to choose a suitable pressing plate form. At the same time, considering that the slitting processing of electrical grade materials also needs to further improve the cutting quality, safe production and reduce operating costs. At this time, it is necessary to match a suitable knife holder for the slitting line machine. When designing the tool holder, it is generally necessary to be able to simply set the horizontal spacing and overlap amount.

Moreover, during the operation of the slitting line machine, it can ensure that the slitting work is stable within the set range. In addition, it is necessary to adjust the horizontal position of the tool shaft accordingly. The horizontal gap can be set digitally on the operation panel, the pickling board is slitting the winding line spot, and the position of the lower shaft is also monitored and adjusted in real time during operation, so that the change in the horizontal gap due to expansion and other reasons is reduced Smaller.

Combining with the above introduction, it can be seen that during the operation of the slitting line machine, the slitting quality must be strictly controlled. Not only should pay attention to reasonable operation, but also the control of its various devices will also affect the cutting quality and the shape of the finished roll. Especially for the drive and control of the cutter shaft and the control of the material speed is very important.

Bangzhou Machinery is the professional automatic slitting machine manufacturer. At present, we have own team of design, production and sales. We can provide our customers with one-stop and high quality service. Welcome to your inquiry, we will do our best to build the machine you want.