1. Steel slitting machine operators should comprehend the slitting devices performance as well as operations.

2. Turn on the power, run the slitting line for test, and verify no mistake before operating. When the slitting line is running, first of all rotate at low rate for 10 ~ 20 minutes. Examine whether the devices has irregular sound or otherwise, quit the maker in time or notify the maintenance employees to be for maintenance on website.

3. Feeding of item must be put in the main setting of the coil slitting line, change the placement of the photoelectric eye of the uncoiling frame and adjust its level of sensitivity to ensure stable monitoring and verify the instructions of the coil.

4. Guide the sheet to the cutter shaft by the instructions of the slitter feeding. Turn on the monitoring, positioning the sheet to be straight, press the adhesive stick, and validate the setting of cutter.

5. Inspect the placement of reducing tool purely to ensure that the item mistake is not more than 0.3 mm according to the needs of production order and also manufacturing procedure sheet.

6. Set up the tension of feed, stress of pinch roller as well as swing roller. Set the tension according to the experience tension.

7. Switch on control power of the curling stress to change the speed to the empirical value, reset the counter to zero, and set the coiling meter.

8. When the meters suffice, decrease the slitting line device rate to make certain that the item is no inconsistency, and it is spick-and-span.

9. When the coil slitting line is in operation, the city water as well as waste are lubricating oil from the devices that ought to be tidied up in time to stop sliding.

10. When the slitting line is in operation, drivers are strictly forbidden to touch the transmission parts by hand (drive shaft, gear, belt wheel and seat roller, etc.).

11. When the slitting line is running and matters are secured by securing rods and also pressure rollers, the device must be shut down for cleaning, and it is not permitted to operate illegally without quiting the equipment.

12. When the slitting line remains in typical procedure, no emergency quit is allowed if it is no crash. Slow down prior to stop the it to make certain the life of the tools.

13. Keep clean around the slitting line device, prohibit to pile up too much sundries and also harmful posts, so as to stay clear of emptying of individuals in case of mishaps timely.

14. Prior to leaving job, the operator has to clean up and also move and preserve the steel slitting line tools.

We are one of the professional slitting machine manufacturer. We can offer you high quality slitting line machine. If you are interested about our machines,welcome to contact with us!