新闻中心banner
Your current location: 首页 > News > Company news > Safe operation of slitting machine
Industry news Company news

Company news

Safe operation of slitting machine

Source:     Time:2020-04-02 Hits:

The slitting machine can cut the strip lengthwise into several parts, and the required specification of the strip base is made of section steel and steel plate welding, and then qualitative treatment. So, how should we safely operate the slitting machine?

 slitting machine

The safe operation of slitting machine is introduced as follows:

 

1. Operators should wear protective equipment to prevent accidents such as scratching fingers and palms.

 

2. During the operation of the steel plate, it is strictly prohibited for operators to get close to the waste side coiler to prevent the side wire of the slitting machine from breaking suddenly and hurting people; Do not stand behind the coiler to prevent sudden injury.

 

3. When the waste edge wire is pulled or detached from the guide post baffle, the slitting machine should be stopped and then processed.

 

4. Do not force the disc scissors down when there is a steel plate, to avoid the collapse of the knife.

 

5. During operation of the slitting machine, please pay attention to the quality of the blank surface and edge, and do not knock arbitrarily. It is strictly prohibited to touch the edge of the blank by hand in the production process.

 

6. When serious defects and out-of-tolerance of accuracy are found in the coil or steel after cutting, the operation shall be stopped and timely handled.

 

7. If abnormal sound vibration and heat are found in the unit during production, the unit of the slitting machine should be stopped for inspection immediately.

 

8. In case of hydraulic system failure and leakage, the oil pump should be stopped in time.

 

In the operation of the slitting machine, we can follow the above safe operation procedures to operate, the correct method of operating the slitting machine is also very critical.

 

Wuxi Bangzhou Machinery Manufacturing Co.,Ltd, is a company specialized in the slitting machine. Our company is professional in designing and producing all kinds plates processing machines. You can choose the customized slitting machine from our company. Welcome to contact with us!



Related news: