新闻中心banner
Your current location: 首页 > News > Company news > Operating procedures of steel slitting machine
Industry news Company news

Company news

Operating procedures of steel slitting machine

Source:     Time:2020-12-21 Hits:

In the following article, we will briefly introduce the operating steps of the steel slitting machine. If you have any doubts about its operation steps, just read it with me, you will definitely gain something.

 

1. There are many points for us to noticed. Before use, it should be checked and confirmed that the electric motor and cable of steel slitting machine are normal, the protection grounding is good, the protective device is safe and effective, the saw blade is selected to meet the requirements and the installation is correct.

 

2. After starting the steel slitting machine, the sawblade should operate at no load, check and confirm that the sawblade runs in the correct direction, the lifting mechanism is flexible, and there is no abnormal or abnormal noise in the operation. When everything is normal, you can do it.

 

3. The operator of the steel slitting machine should press the workpiece tightly with both hands and feed evenly. When driving the steel slitting machine, it is not necessary to exert too much force. No gloves are not allowed to operate.

 

4. The thickness of the cutting shall be carried out according to the nameplate of the mechanical factory, and the cutting shall not be super thick.


 slitting machine


5. When the workpiece is sent to a distance of 300mm from the saw blade or small pieces of material are cut, the special tool shall be used to deliver the material, and the material shall not be directly pushed by hand.

 

6. During the operation of steel slitting machine, when the workpiece has impact, beat and abnormal sound, the machine should be stopped immediately to check. After troubleshooting, the operator can continue to work.

 

7. It is strictly prohibited to check and repair the components in the operation. Scraps on saws and structural saws should be removed in time with special tools. No hand picking or testing should be allowed.

 

8. After operation, the fuselage of steel slitting machine shall be cleaned, the saw blade shall be dried, residual water from the water tank shall be discharged, the cable wire shall be returned and stored in a dry and ventilated place.

 

Bangzhou Machinery can provide you with the best steel slitting machine at the best price. With years of development, We have gained the great reputations in the field of steel slitting machine industry. Please feel free to contact us if you have any further inquiry.



Related news: