新闻中心banner
Your current location: 首页 > News > Company news > Inspection work before starting the slitting line
Industry news Company news

Company news

Inspection work before starting the slitting line

Source:     Time:2021-02-02 Hits:

Before officially launching the slitting line and starting production, we need to have a series of inspections, whether it is about sanitation or equipment. Below, let us introduce in detail the steps involved in the inspection work.

 

1. Before the formal production, the dust and dirt and other foreign matter on the surface of the slitting line and the coil should be carefully cleaned to keep the slitting line and the ground floor and articles clean. At the same time, all rollers on the guide road which the strip passes should be carefully cleaned. When necessary, it needs to be polished with sandpaper and then wiped clean with alcohol to ensure that the surface of the finished product is free from scratch and other defects caused by this process.

 

2. Check the mechanical and electrical system of the steel slitting line according to the equipment inspection table, and operate the slitting line in an empty state to confirm that the slitting line is in a normal and power-on state.


 Steel coil slitting line machine


3. Check whether the production card is consistent with the batch number, alloy status, specification size and weight of the material coil; According to the quality and acceptance criteria of steel slitting line machine, check whether the surface quality and end face quality of the pending coil meet the needs of production. Before starting the slitting line, the crew must comply with the requirements for machine maintenance and operation. After carefully checking all parts of the body, they can send electricity, otherwise they are not allowed to start the slitting line.

 

4. The blanks and finished products parameters are correctly input in the control procedures of the main operation console of the slitting line, such as incoming material thickness, incoming width, finished product width, and finished product length. According to the width of incoming material and finished product, calculate the required cutting width and adjust the tool distance. Meanwhile, the number of pieces per stack is calculated according to the requirement of production card.

 

Bangzhou Machinery is the professional slitting machine manufacturer. Our slitting lines are all of high quality and reasonable price. From these years business, our machines are favored by our customers.Welcome to your inquiry, we will do our best to build the machine you want.



Related news: