新闻中心banner
Your current location: 首页 > News > Company news > Factors affecting the abnormal processing of slitting machine
Industry news Company news

Company news

Factors affecting the abnormal processing of slitting machine

Source:     Time:2020-04-15 Hits:

In the process of cutting some thin sheet materials by the slitting machine, some abnormal problems may occur in the product processing due to the influence of many factors. Next, we will give you a brief introduction to these problems, hoping to help you better use the slitting machine to improve product quality.

slitting machine 

In the actual production, due to some factors, they may lead to the slitting machine shear steel coil shape some abnormal, such as collapse. For example, after shearing, the steel coil from the reel out of the collapse of an oval, the reason for such a situation, the main reason is due to the insufficient tension caused by the winding, or is due to the surface of the steel belt rust oil, layer to layer can’t form enough friction.

 

The second reason may be due to the size of the tension during the crimping process which leads to unevenness. When the steel head end is cut off, the straight angle is not good or the straight angle is not good when the tongs bite into the steel head end, resulting in uneven tension. On the reel, after the steel reel is rolled around, first confirm whether the strip is tightly attached to the surface of the reel, and then start the operation.

 

The third reason may be because the steel belt in the pit of the looping sleeve of the slitting machine is shaking from side to side, resulting in uneven material collection. In addition, for this case, it may also be due to the slitting machine appears more burrs when slitting which leads to uneven material. On the narrow steel strip due to large shear burrs or the two sides of the burrs are not consistent. This situation can be effectively prevented by turning the steel strip with double burrs up inside the loop pit to make burrs down.

 

Wuxi Bangzhou Machinery Manufacturing Co., Ltd. is a company specialized in slitting machine. We provide the customized slitting machine and our high quality slitting machine has a leading position in the industryWelcome to contact with us!



Related news: