新闻中心banner
Your current location: 首页 > News > Company news > 3 points to pay attention to when choosing slitting line
Industry news Company news

Company news

3 points to pay attention to when choosing slitting line

Source:     Time:2020-06-03 Hits:
There are many different types of slitting line. But some people don’t know how to choose the high quality slitting line.We should consider a lot of aspects of the equipment. Today we are going to talk about 3 points to pay attention to when choosing slitting line. If you are interested, just read the following article.

 slitting line

1. Environmental protection and energy conservation

It also means power consumption and noise. As a small device, the power consumption of slitting line is relatively small in the process of completing its main functions. Due to the lack of technical knowledge, the domestic slitting line meets the functional requirements with high power. For example, there is a blowing edge and a suction edge in the processing of the cutting edge. The power consumption of the blowing edge is relatively small, but the blowing edge cannot complete the corresponding function when the design is not reasonable. In some equipment, due to the structure or operation, it is more appropriate to adopt the suction edge scheme, but it is impossible to suck out the suction edge when the design is not reasonable. At this time for manufacturers to increase the power of the fan is a common practice. That is to say, the user will use the cost of increase, slitting machine this practice is very unfair to the user. Noise is one of the outstanding problems of the equipment. When the manufacturer increases the power, the noise of the equipment will also increase.

 

2. The usability of the slitting machine

Try to use high flexibility, wide range of applications of the machine equipment.The slitting line is always difficult to separate for some kinds of materials in the process of use. For example, the cutting speed of BOPP white film is higher and the cutting quality is satisfactory. However, when cutting PE print vertical shear line on the performance of reluctant, the speed is not high, the quality of cutting is poor. To correct the reason, we can find that the equipment or in the design of the processing control of the insufficient performance, resulting in unstable cutting performance.

 

3. The operability and safety of the slitting machine

All of the slitting lines can be used basically, but the maneuverability and safety of the machine is a long-term shortage of domestic equipment. Many operators are dissatisfied with the regular operation of the slitter machine, such as the up and down of the slitter machine, the breaking of the material and the cutting of the material, the adjustment of the tool holder, the replacement of the blade and the normal maintenance of the equipment. The insufficient safety of the equipment is reflected in the insufficient protective warning measures such as high-speed rotating parts, transmission chains, cutting parts, hydraulic and pneumatic actions. The problem, then, is that the makers of the devices have been ignoring it.

 

Bangzhou Machinery is a slitting machine manufacturer. We can offer you the high quality slitting line and can provide our customers with one-stop and high quality service. Welcome to your inquiry, we will do our best to build the machine you want.




Related news: