新闻中心banner
Your current location: 首页 > News > Industry news > Steel Coil & Roll & Hydraulic Tilter Machine
Industry news Company news

Industry news

Steel Coil & Roll & Hydraulic Tilter Machine

Source:Trueland     Time:2022-04-18 Hits:

Our tilters are reliable, secure and accurate machines. The tilting unit for reels it is used also as coil tilter machine and can be mechanical or hydraulic. It can be place in the ground or on the floor or, and in both cases it works by transmitting the movement from the motor to the tilting table by a chain.

 

10 ton steel coil tilter (upender)

 

This steel coil tilting equipment is mainly used for tilting/turning horizontal steel coils into vertical steel coils smoothly and safely. In view of the need to uncoil and transport the steel coil during the rolling process, the horizontal axis becomes vertical through the rotation of the rolling mill, and then the steel coil can be moved along the vertical axis and unrolled in the circumferential direction.

 10 ton steel coil tilter (upender)

 

Technical parameters:

coil diameter ≤1600mm                   

coil width 800mm

capacity 3T/5T/10T

diameter of oil cylinder φ100mm

motor power of pump 4KW

 

Functions:

1、It can adjust the direction of metal coils to make the coils convenient to transportation or be processed.

2、It adopts the independent hydraulic and electrical system with the hydraulic pressure and control unit insert.

3、V-shaped surface to meet the coils need and prevent the movement of the coils.

 

15 ton roll tilter (upender) 

 

This large roll tilter has a model capable of lifting and tilting loads up to 15 tons, allowing you to tilt loads or roll products a full 90 degrees.15 ton roll tilter (upender)

 

Technical Parameter

Max Coil width  1300mm

Max Coil diameter  1500mm

Turning angle  90°

Capacity: 15T

Rated power: 5.5kw

Machine weightabout 2.5T

The diameter of hydraulic oil cylinder: φ150mm

The number of hydraulic oil cylinder: 2pies

Pressure of hydraulic system: 0-16Mpa

Pump model: CBT-F325

Nominal capacity: 40/ML/r

Turnover time: about 30S 

 

Devices:

1、Adopt the independent hydraulic and electrical system with the hydraulic pressure and control unit insert.

2、The valve uses DC24V, the electrical control adopts 24V pressure.

 

hydraulic tilter (upender) 

 

The hydraulic coil tilter is a tilter used to tilt the coil from a vertical hole position to a horizontal hole position for safe loading onto the decoiler.

 hydraulic tilter (upender)  

 

Technical Parameter

Max Coil width  1250mm

Max Coil diameter  1400mm

Turning angle  90°

Capacity  5T

Rated power  4kw

Machine weight about  1.8T

The diameter of hydraulic oil cylinder  φ120mm

The number of hydraulic oil cylinder  1pie

Pressure of hydraulic system  0-16Mpa

Pump model  CBT-F325

Nominal capacity  40/ML/r

Turnover time about  30S

 

Devices:

1、Adopt the independent hydraulic and electrical system with the hydraulic pressure and control unit insert.

2、The valve uses DC24V, the electrical control adopts 24V pressure.

 

Our company specializes in manufacturing and supplying all kinds of sheet metal processing machinery. If you want to order or learn about processing machinery, please contact us today.

 



Related news: