新闻中心banner
Your current location: 首页 > News > Industry news > slitting machine maintenance
Industry news Company news

Industry news

slitting machine maintenance

Source:Trueland     Time:2022-08-25 Hits:
After years of development, our customers are located in many countries around the world, and BANGZHOU MACHINERY is very grateful for their support. We always manufacture quality slitting machines, that's why our customers are satisfied with us. Today, we are here to share with you the secret to keeping our machines high quality.

Slitting Machine Maintenance

To make the slitting machine last longer and run better, slitting machine maintenance is essential.


Pour all verniers for lubricating oil before using the slitter equipment. The sliding table screw nut and its bearing on the equipment should be lubricated with grease. In the future, pay attention to regularly check the sound and temperature rise of the bearing part of the slitting machine, and re-apply grease if necessary. Apply a little oil on the working table of the slitting machine to prevent when the slider is moved.


Daily maintenance and upkeep of slitting machine equipment includes adding oil to the uncoiler, winder, and reel on a total of eight press-in oil marks before utilizing the equipment. Then, during the processing phase, we truly need to pay attention to the slitting machine equipment, also known as the waist crease, which is located in the direction of the width of the steel plate through the crease. There are more factors at play.


If the rolled knife causes a waist crease when using slitting machine equipment, the steel belt will be caught in the knife because the rubber ring's outer diameter is too narrow on one side of the product. The best approach to avoid this is to raise the rubber ring as high as you can without leaving a knife mark. However, press work can also successfully avoid the emergence of rolled knives in the context of processing thin multi-strip materials.


For the center of the steel plate stretching bigger steel longitudinal coil shear processing, the uncoiler is compelled to generate waist crease due to the shape of the raw material being caused by the waist crease. In order to assure processing quality, we need pay attention to the usage of three rollers while leveling side processing may be successfully avoided.


Thank you for reading our article, you can also share with more people about slitting machine maintenance, so that they can get more professional knowledge.BANGZHOU MACHINERY has spent decades perfecting the steel processing technology and only provides customers with the best slitting machines.BANGZHOU MACHINERY offers the absolute best technology selection worldwide and is the leader in slitting machines. We have been developing and manufacturing machines for professional coil processing. Our partnership gives us the opportunity to bring all the best machines to you!



Related news: