How Does a Slitting Line Work?
The winder collects and winds multiple rolls of film at the end of the slitting line. The setting of the winder should be synchronized with the slitter so that the multi-winder can wind well. Coilers are important in specific slitting processes where long strips are produced.
The operator feeds the coil onto the decoiler mandrel. The decoiler is referred to as the uncoiler at times.The uncoiler unwinds the main coil and feeds it into the slitter head. Extremely sharp circular blades, one upper and one lower, cut the coil as it passes through the slitter. These are often called knives and can be moved to make metal slats of different widths. There the steel will be cut into narrow strips by a rotary knife, and each finished width (or strand) is rewound to produce finished width slit coils.
The operator then needs to check the individual coils to ensure that the gauge width and edge conditions meet the required specifications. Afterwards, the inspected coil will be passed through an annular pit to ensure stress-free and bend-free backlash of the slit material. Finally, the individual coils are bundled and packaged according to the specific requirements of different customers. Such a complete slitting line process is completed!
Maybe you want to know about our company 6x1600 automatic steel slitting line, 10x1600 Automatic steel slitting line, 400mm simple slitting machine or other slitting machine, we are very proud to prepare our services and materials to meet your requirements.
Related news:
- Description of the working principle of the plate leveling machine
- Edge wave phenomenon appears in the sheet of slitting line
- Achieving Perfectly Flat Surfaces with 16mm Hot Plate Leveling Machine
- Daily maintenance of slitting knive tablets
- Cut to Length Machine Operating Instructions and Precautions
- Maintenance of steel leveling machine