The hydraulic system is an important part of the slitter, which realizes the functions of the slitter through hydraulic transmission. In the repair and maintenance of the slitter machine, it is sometimes necessary to disassemble the hydraulic system for repair or replacement of parts. This paper will introduce the disassembly method of the hydraulic slitting machine system to help users understand how to disassemble the hydraulic system correctly.

　　Preparation

　　Before disassembling the hydraulic system, the following preparations need to be made:

　　1. Turn off the power supply of the stripper and ensure that the machine is stopped.

　　2. Prepare required tools, such as wrenches, wrench sockets, and screwdrivers.

　　3. Prepare the required safety equipment, such as gloves and goggles.

　　Disassemble the hydraulic pump

　　1. First, find the location of the hydraulic pump. The hydraulic pump is usually located at the bottom or side of the slitting machine.

　　2. Use a wrench or wrench socket to remove the bolts on the hydraulic pump. Note that the number and location of bolts may vary from one slitter to another.

　　3. Remove the hydraulic pump from the slitter machine and place it in a safe place.

　　remove the hydraulic cylinder

　　1. Locate the hydraulic cylinder. The hydraulic cylinder is usually located on the upper or side of the slitter.

　　2. Use a wrench or wrench socket to unscrew the bolt on the hydraulic cylinder. Note that the number and location of bolts may vary from one slitter to another.

　　3. Remove the hydraulic cylinder from the slitter machine and place it in a safe place.

　　remove the hydraulic valve

　　1. Locate the hydraulic valve. The hydraulic valve is usually located on or near the control panel of the slitting machine.

　　2. Remove the screws from the hydraulic valve using a screwdriver. Note that the number and position of screws may vary from one slitter to another.

　　3. Remove the hydraulic valve from the splitter and place it in a safe place.

　　disassemble the hydraulic pipeline

　　1. Locate the hydraulic line. Hydraulic lines are usually connected to hydraulic pumps, hydraulic cylinders and hydraulic valves.

　　2. Use a wrench or wrench socket to remove the bolt on the hydraulic pipe. Note that the number and location of bolts may vary from one slitter to another.

　　3. Remove the hydraulic pipe from the splitter and place it in a safe place.

　　Summary

　　Through the above steps, we can successfully disassemble the hydraulic system of the slitter machine. When disassembling the hydraulic system, it is necessary to pay attention to safety to avoid accidents. Before disassembling the hydraulic system, it is best to understand the structure of the slabbing machine and the working principle of the hydraulic system in order to better disassemble and repair.

　　This paper introduces the disassembly method of the hydraulic slitting machine system, hoping to help users to disassemble the hydraulic system correctly, and provide some reference for the repair and maintenance of the slitting machine. If you have more questions about the disassembly of the hydraulic slitting machine system, you can consult a professional hydraulic system expert or maintenance personnel.

　　Whether the steel coil slitter is necessary to be cleaned weekly

　　Advantages and uses of Automatic slitting machine

　　The role of looping in Slitting machine composition equipment

　　Manual slitting machine Common problems and solutions

　　The correct installation of the Slitting machine blade