What is the correct way to install the Slitting machine blade? Next, the slitting machine manufacturer to explain to you.

　　The meaning of the slitting actually refers to the longitudinal cutting of the steel plate, so that the width of the steel plate changes, such as: the width of the steel plate is 100 mm cut into two plates with a width of 50 mm. At this time, you need to use the slitter equipment. In this equipment, it is clear that the blade plays a crucial role.

　　The blade of the slitter equipment also needs to have good toughness to minimize the occurrence of the chipping phenomenon, and the surface finish of the blade is high, usually requiring fine grinding to achieve. Of course, these are comprehensive considerations in terms of cost, efficiency and quality. The most ideal state is to further improve the quality and service life of the blade without increasing the cost.

　　If the thickness of the plate processed is between 3 mm and 7 mm, and the daily processing amount is relatively large, then the blade quality requirements for the slitter equipment are relatively high. In general, the hardness requirements for the blade should be above 65HRC. Secondly, it has good wear resistance, otherwise frequent tool changes will be required in production. This will inevitably affect the production quality and production efficiency.

　　If it is found that there are more obvious burrs on the cut of the plate after cutting, it means that the tool has appeared a large wear, which has affected the quality of the cut. In view of this situation, the user needs to replace the new qualified Slitting machine blade in time. When installing the blade, it should be carried out according to the actual size needed.

　　It is necessary to consider whether the gap between the upper and lower cutting tools of the slitter equipment is reasonable to prevent the use of influence. Of course, during the use of the slitter equipment, we regularly need to carefully maintain the blade to extend its service life as much as possible.

　　How to use Automatic slitting machine to achieve high-speed production?

　　metal slitter main functions of each system

　　Whether the steel coil slitter is necessary to be cleaned weekly

　　Advantages and uses of Automatic slitting machine

　　The role of looping in Slitting machine composition equipment