How should I maintain a simple uncoiler
simple uncoiler is a special equipment for the levelling of sheet metal. It is used for levelling wire steel plate and uneven plate. According to the relevant configuration, the uncoiling, levelling, shearing production line and other plate product production line can be formed. Suitable for machinery, vehicles, metal products, household appliances, steel structure, decoration and other industries.
In order to make the service life of simple uncoiler more durable, we need to carefully carry out daily maintenance of it, the process is as follows:
1. Oil the smooth and artificial smooth points of each oil cup as required.
2. Roll the plate according to the parameters specified by simple uncoilersimple uncoiler. The thickness of the coil plate is 20mm, the length is 2500mm, and the yield limit of the coil material is less than 250Mpa.
3. After turning on the power supply, carry out the positive and negative direction of the lower roller and the lifting movement of the upper roller, and check the abnormal phenomenon of card death in each movement.
4, in strict accordance with the simple uncoiler coil processing procedures and operation methods to operate, in the upper roller lifting to the limit position, to pay great attention to the safe operation of the equipment.
5, when the main drive is stopped, the lifting of the upper roller can be carried out, the tipping return of the overturned bearing and the cocking of the upper roller.
6, in the process of operation, if you find irregular noise, impact and other abnormal phenomena, should immediately stop to check.
7, the operation of the personnel to coordinate with each other, follow the command of the person in charge of the coil, no command, prohibited to start the machine.
8, the simple uncoiler coil operation should pay great attention to the hand is pressed by the steel plate and rolled together with the steel plate.
9. When lifting steel plates or rolls with a crane, be careful not to collide with the machine.
After the simple uncoiler operation, make sure that the material is finished and the place is clear, and do a good job in the maintenance of the equipment, and close the power supply in time.
Related news:
- The influence of environment on the life of slitting machine
- How to improve the accuracy of steel plate leveler
- The structure of the slitting machine
- Slitting line sheet deformation-waist creases and wrinkles
- Safe Production of Aluminum Plate Slitting Machine
- Description of the working principle of the plate leveling machine