新闻中心banner
Your current location: 首页 > News > Industry news > What to do after the slitting line is energized?
Industry news Company news

Industry news

What to do after the slitting line is energized?

Source:     Time:2021-09-07 Hits:

The slitting line is also called slitting unit, slitting machine, and shears. It is mainly used for slitting and cutting coil materials such as tinplate, galvanized iron, silicon steel sheet, cold rolled steel strip, stainless steel strip, aluminum strip, and steel strip.

 

The slitting line is to cut the metal coils into strips of various widths, and then harvest the strips into small coils for use in the next process. The slitting line is a necessary equipment for precision cutting of the transformer, motor industry and other metal strips.

 

The slitting line is used for uncoiling, slitting, flattening, and cross-cutting hot rolled strip, flat iron, flat steel, etc. into flat steel with a certain width and length to replace the traditional rolling flat steel forming process. The slitting line has the characteristics of high precision, high yield, environmental protection, high efficiency, and low cost.

 


According to the thickness of the slitting board, it can be divided into thin plate sliding line (processing thickness 0.1-3.0mm) and thick plate sliding line (processing thickness 3.0-6.0mm). According to the metal material of slitting, it can be divided into copper strip slitting line, stainless steel slitting line, cold plate slitting line, silicon steel slitting line, and tinplate slitting line. According to the degree of automation, it can be divided into automatic sliding line and semi-automatic sliding line.

 

After ensuring that the connection line of the entire production line of the slitting line is correct, the metal slitting and slitting machine is energized. After energizing, do not open the electric control door at will, and do not touch the electrical components with your hands to prevent electric shock and injury. And the operator should pay attention when operating the sliding line.

 

1. Make sure that the operator of the slitting line is familiar with the operation process, and operates strictly in accordance with the operation process, and has the qualification certificate for the job. This also includes that the operator must not keep long hair himself, operate the machine with gloves, and tighten the cuffs of his clothes (except for loading and unloading knives). All are to ensure the safety of the operator when operating the sliding line.

 


2. Pay attention to the force fit and the fixed position of the unwinding when the sliding line feeding trolley is feeding to prevent the raw material from falling off and hurting the feet. At the same time, make sure that the position of the metal material on the uncoiler is accurate.

 

3. The sliding line must not open the control box door at will or use your body, hands, or head to touch the transmission part. Do not place the head too close to the material and the roller when visually inspecting the operation. Do not lean your body against any part of the machine. At the same time, the sliding line must not touch the scroll wheel by hand during operation.

 

4. When unloading, pay attention to brake the unloading arm pulley to prevent the unloading arm and the winding shaft from falling off the material and hurting the feet.

 

Wuxi Bangzhou Machinery Manufacturing Co., Ltd. is a company specialized in steel coil straightening machine, slitting line, cut to length line and flat bar straightening and chamfering machine. Our company is a professional slitting line manufacturer. If you are interested in slitting lines, don’t hesitate to contact with us.



Related news: