We all know that a good working environment can increase people's enthusiasm for work and can effectively improve work efficiency. In fact, the same is true for machines. A good working environment has a very important impact on the life and efficiency of the machine.

Slitting machines are CNC precision machines among many machines, and naturally they have stricter requirements on the operating environment. In the environment that affects the efficiency and life of the slitting machine, the high temperature, humidity and dirty environment will have a greater impact on it. Let's analyze the impact of these two types of environments on the slitting machine.

The on-line cable between the control cabinet of the slitting line machine tool and the machine tool must be protected by a cover plate or plastic plate for the mopping part, and can not be stepped on at will. The cable must be in a slack and free state, and must not be pulled by external force, the cable plug must not be stressed, and the corrugated sheath of the cable must not be crushed and crushed.

In order to extend the service life of the guide wheels and bearings of the slitting line machine tool, the too dirty coolant should be replaced. Do not turn on the machine for a short time, and let the guide wheel rotate for tens of seconds without water to throw out the makeup. Remove the screw plug of the guide wheel seat and inject grease to drain the dirt through the oil gap, so that the guide wheel and the bearing are always in a cleaner state.

Couplings and keys on the shaft of the slitting machine and the motor should always be in a tight and stable fit. Once the loosening of the key and the impact of the coupling occur, the cushion and key of the coupling should be replaced immediately. After long-term reversal with clearance, the keyway on the shaft will deform and expand.

The slitting machine is not suitable for working in a dirty and high temperature and humid environment, and it also has higher requirements for the power supply environment of the power grid. The power supply voltage of the machine tool should not be less than ±10%, and the three phases should be balanced and stable. Too bad power grids must be equipped with stabilized voltage sources. In addition to the normal cleanliness and lubrication of the slitting line machine tool, the following parts must be carefully maintained:

Always pay attention to keep the conductive block in a good conductive state. The pads on the workbench must be insulated from the bed. The drag line of the stepper motor should be in a free state, and the stepper motor should ensure that there is no immersion of dirty water.

No part of the machine bed surface of the slitting line shall be knocked or collided, especially the wire frame and the bed surface shall not interfere with the bed surface due to the over-travel motion, which will seriously damage the parts or accuracy of the machine tool.

We must choose a suitable production environment according to the actual production needs, and strive to make the slitting machine play the best production performance.

Wuxi Bangzhou Machinery Manufacturing Co., Ltd. is a company specialized in steel coil straightening machine, slitting line, cut to length line and flat bar straightening and chamfering machine. Our company is a professional leveling machine manufacturer, if you are interested in leveling machine If you are interested, don't hesitate to contact us.