Slitting blade is one of the important components of the split cutter equipment.Improper selection of slitting blade is easy to shorten the service life of the split cutting blade, unable to meet the requirements of the split cutting index, and the split cutting material produces wool edges and a large number of split cutting powder.

Precautions for operation

Although the slitting blade is small, special personnel must be arranged to conduct normal maintenance and storage, and the operator must be familiar with the structure and performance of the machine tool.It is strictly prohibited to use round blades over overload, and hardened steel, high-speed steel, alloy steel, castings and not metallic materials.

1. The slitting blade blade mouth shall be kept sharp, blunt or damaged, and shall be worn or replaced in time.Multi-person operation should be a special person to command, cooperate to coordinate.Scutting of two different specifications is prohibited on slitting blade without overlapping cutting.

2. Do not cut the handle to promote the operation under the pressing plate. When cutting the material, the material should be pressed with another iron plate, and the finger leaves the knife mouth at least 200 mm.After holding the line, should immediately pry out can cut, if the iron plate has around, the application of wooden pillow plug, so as not to press down after the pry holding pop up hurt.

3. Slitting blade cut workpieces must be placed smoothly, not stacked too high, not stacked on the corridor.The surplus materials and waste materials should be cleaned up in time toKeep clean.

Wuxi Bangzhou Machinery Manufacturing Co.,Ltd, located in Changjing Town of Wuxi, is a company specialized in steel coil straightening machine, slitting line, cut to length line and flat bar straightening and chamfering machine.

Welcome to your inquiry, we will do our best to build the machine you want.