Improve the operating efficiency of the slitting line
For large-scale production lines such as slitting lines, improving efficiency has always been a dream for manufacturers.
In many cases, the efficiency of the entire production line may be greatly reduced due to a part of the machine. Therefore, when operating the slitting line, it is necessary to check some common problems of the machine parts. Only in this way can we kill small problems in their budding state. Below we will understand the methods to improve the efficiency of the slitting line from five aspects.
1. For machines with a relatively large load in the production line, check the fastening bolts frequently to see if they are loose. If there are problems, they can be dealt with in time to avoid accidents.
2. The positive and negative poles of the main machine uncoiler power supply can not be reversed, and the machine is strictly prohibited to reverse.
3. When each machine of the production line is running, no one is allowed to pass over the rotating sheet to prevent accidents.
4. Other personnel who are not operators of this production line are not allowed to touch the machine.
5. Develop the basic rules for cleaning the machine to extend the service life of the machine.
With the continuous rise of the high-tech industry, the requirements for precision in the CNC industry are getting higher and higher. In view of the development of the industry, the slitting line is gradually improving its own slitting accuracy.
During the operation of the slitting line, most of the machining accuracy depends on the accuracy of the feeding system. Once feeding problems occur, such as not meeting the required accuracy, jamming, tilting, waist folding, etc., it will have a serious impact on the processing efficiency of the entire production line. And it may also greatly affect product quality.
In the face of the above problems, the slitting line equipment has been improved accordingly, and a manipulator clamp is added to the feeding system for automatic feeding. The high-precision servo system is used to control the feeding accuracy, the electronic system is used to verify the accuracy and size, and the sawing car uses linear precision guide rails.
After such an improvement, high-tech electronic control is adopted from the feeding control in the early stage, the size check in the middle stage and the determination of the track, and the accuracy is truly foolproof. Moreover, this fully automated feed control system greatly improves the production efficiency of the entire production line and reduces the frequency of failures.
It is very important to improve the production efficiency and processing accuracy of the slitting line. The operation of machines and production lines is inseparable from regulations and operation methods. High production efficiency can only be achieved by operating in accordance with certain regulations.
Wuxi Bangzhou Machinery Manufacturing Co., Ltd. is a company specialized in steel coil straightening machine, slitting line, cut to length line and flat bar straightening and chamfering machine. Our company is a professional slitting line manufacturer. If you are interested in slitting line, don’t hesitate to contact with us.
Related news: