Attentions for operating the slitting line
The safe operation of the slitting line is very important, because irregular operations can easily cause workers to be accidentally injured by the blade, so the operator must pay attention to safety. Bangzhou Machinery will introduce the correct and safe operation method of slitting line for everyone.
Slitting line is also called slitting machine, which is mainly used for slitting and cutting coil materials such as tinplate, galvanized iron, silicon steel sheet, cold rolled steel strip, stainless steel strip, aluminum strip, and steel strip. The slitting line is to cut the metal coil into strips of various widths, and then collect the strips into small coils for use in the next process. Slitting line is the necessary equipment for precision cutting of transformer, motor industry and other metal strips.
According to the thickness of the slitting plate, it is divided into thin plate slitting line (processing thickness 0.1-3.0mm) and thick plate slitting line (processing thickness 3.0-6.0mm). According to the slitting metal material, it can be divided into copper strip slitting line, stainless steel slitting line, cold plate slitting line, silicon steel slitting line, and tinplate slitting line. According to the degree of automation, it can be divided into automatic slitting line and semi-automatic slitting line.
The production process of the slitting machine is the feeding trolley feeding-the upper uncoiling machine unwinding-the discharging rack-the uncoiling storage pit-the circular shearing machine slitting-the scrap side mechanism-the transition frame-the tension mechanism-the winding machine- Unloading trolley-hydraulic components-electrical control system-pneumatic components.
Attentions
1. The operator of the slitting line must push the parts to the straightening device through the feed table until they are clamped by the straightening roller. The operator must be prevented from being brought into the equipment by the straightening roller, and it is forbidden to reach into the straightening roller.
2. It is strictly forbidden to use defective and unsafe safety devices.
3. Pay attention to the safety warnings marked on the machine, and immediately shut down for maintenance if any abnormality is found.
4. It is strictly forbidden to use materials other than steel, stainless steel and aluminum.
5. Slitting line operators should use and wear labor protection equipment reasonably according to regulations to avoid being pulled into the equipment. At the same time, the operator must abide by the safety rules.
6. The operator must strictly follow the operation manual of the slitting machine. Unauthorized personnel are strictly prohibited to operate the machine tool.
7. The operator must set the parameters in strict accordance with the operating instructions of the slitting machine to prevent the speed from being too high.
8. Non-professionals are strictly prohibited to open the electrical cabinet at will.
9. The operator has the right to terminate any operation that may cause casualties and accidents.
10. All outsiders are forbidden to open the control cabinet and touch the console at will. Operators have the right to stop the onlookers and unsafe behaviors of all irrelevant personnel.
Wuxi Bangzhou Machinery Manufacturing Co., Ltd. is a company specialized in steel coil straightening machine, slitting line, cut to length line and flat bar straightening and chamfering machine. Our company is a professional slitting machine manufacturer. If you are interested in slitting machines, don’t hesitate to contact with us.
Related news:
- Introduction of slitting and cut length all-in-one machine
- Rotation accuracy of slitting machine knife shaft
- Servo control makes slitting lines greener
- What should be paid attention to when using the slitting machine?
- Precautions for the operation of high-speed slitting machine
- The faults that are prone to occur in the slitting line