Hot plate leveling machine adapt to high strength materials in processing.

 With more and more applications to high tensile strength materials in metal sheet metal industry, the leveling of the material requires large leveling pressure.In the leveling process, the higher leveling pressure will certainly affect the machine tool structure and the leveling roller.The equipment is very important to improve the leveling quality and the life of the machine tool.

Although the hot plate leveling machine adopts split roller drive can solve the problem of roller wear or steel plate wear to a certain extent, because in the process of leveling the steel plate, each roller is different, and the force and torque sustained by the third roller are large, accounting for about 30% of the total torque.

If the drive of each roller driven by the split roller is selected according to the large torque, it is easy to cause power waste. Moreover, because the roller diameter and roller distance are affected by various factors such as plate thickness, yield limit, and calibration accuracy, the roller diameter and roller distance should not be taken too large, which is limited by this structure in many cases This transmission structure cannot be arranged according to the large torque.

 but if not, it is easy to cause a single roller in the process of leveling the steel plate, thus affecting the calibration accuracy or unable to leveling the steel plate, especially when the leveling plate is seriously deformed high strength steel plate, more should not be used,So there is a big advantage.