产品展示banner
Your current location: 首页 > Products > Cut To Length Line > Automatical cut to length line > (0.2-2)X1300mm automatic cut to length machine
Cut To Length Line Slitting Line Slitting machine blade Leveler Tilter Flat Bar Machine
Automatical cut to length line Hydraulic cut to length line Simple cut to length line

Automatical cut to length line

(0.2-2)X1300mm automatic cut to length machine

(0.2-2)X1300mm automatic cut to length machine

The  line  is applied to cold rolled steel, silicon steel , tinplate, stainless steel and color painted steel materials.  It is popular among the steel further processing, electrical household appliances, automobile and electronic products fields.


We're here to helpEasy ways to get the answers you need.

About (0.2-2)X1300mm automatic cut to length machine


Technical Parameters

1.

Steel material

GS,CS, SS, Al and so on

S

Steel coil thickness

0.2-2mm

3.

Steel coil width

300-1300mm

4.

Steel coil weight

15T

5.

Steel coil I.D

Ф508mm,Ф610

6.

Steel coil O.D

Ф900mm-ф1600mm

7.

line speed

0-70m/min

8

Cutting speed:(for 2 metters)  

≥28pieces/min

9.

Leveling roller diameter

Ф65mm

10.

Distance between leveling rollers

70mm

11.

Leveling rollers material

GCr15

12.

Leveling rollers hardness

HRC58-62

13.

Power

380V three-phase electricity 50Hz

14.

tolerance of diagonal error

≤±1mm/2000mm

15.

tolerance of length error

≤±0.5mm/2000mm

 

layout 

 


 1300mm automatic cut to length machine


 1300mm automatic cut to length machine


1300mm automatic cut to length machine

1300mm automatic cut to length machine

1300mm automatic cut to length machine

1300mm automatic cut to length machine


1300mm automatic cut to length machine

1300mm automatic cut to length machine

1300mm automatic cut to length machine




Composed devices

1.

Hydraulic coil Car

1 unit

2.

Hydraulic de-coiler

1 unit

3.

4-High pre-leveling machine  

1 unit

4.

Looper

1 unit

5.

Side guide device

1 unit

6.

Servo precise straightening machine

1 unit

7.

High speed shearing machine

1 unit

8.

Transportation table

1 unit

9.

Hydraulic lifting table

1 unit

10.

Pneumatic stacker device

1 unit

11.

Exit coil car 

2 unit

12.

Pneumatic system

1 set

13.

Electrical control system

1 set

14.

Hydraulic Control System

1 set

1. Hydraulic coil Car

     The car can move levelly and vertically, which is convenient for putting the steel rolls to the decoiler.

     It is driven vertically by hydraulic pressure and the level movement is driven by XWD1.5-63-121 cycloidal motor.

     It is equipped with hydraulic oil cylinder with four guide pillars so is stable and safe.

     The weight it can carry is 15T(Max).

2. Hydraulic decoiler

     Supporting steel rolls and uncoiling.

     The core can ensure the expand range φ508 of the coils inner diameter

     It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter of coils. It is equipped with the cantilever.

     7.5KW motor drive the coils running and can do forward and reverse running as well as do the decoiling with tension.

3.4-h pre-leveling machine with the press and pinch device

      It is equipped with the press and pinch device at the entry which is driven by hydraulic.

     It is composed of 19 leveling rollers, 2groups of supporting rollers, driving device and 2 pinch rollers and frame. Both sides of each rolling wheel is transmitted by needle pins all are the main force rollers. The total quantity of the rollers is 21, the diameter is 65mm and the distance between the rollers is 70mm, with supporting rollers. All the rollers are plating leather to protect the stainless steel plate surface is not wear.

     The function of the supporting roller is to balance the leveling rollers force and reduce the friction to the rollers.

     The working rollers can be adjusted the gap electrically which is controlled by 2 hand wheel to ensure the leveling quality.

     Driving model: all the independent rollers and gear box are driven by 30Kw frequency control motor

4. Loop

     It uses the 2 groups of magic eyes to control the speed buffer between leveler and Servo precision straightening machine.

     Magic eye is controlled by PLC.  

5. Side guide device 

     It uses the vertical roller-wheel on the both sides to direct strips into straightening device and cutting machine.

     The stand rollers on both sides are adjusted by lead screw. The range of the width is 300-1300mm.

6. Servo precision straightening machine

     All four pieces delivery length roller, roller by tempering coated on the surface of polyurethane by fine grinding.

     It is controlled by servo electromotor and used to regulate for high speed feed and precise length control.

     The operation is done at the control table with programmable control.

     Drive model: 11Kw servo motor with precise decelerating transmission and synchronous to transport the belt to feed rollers

7.2X1300 High speed shearing machine

     Shear model: cut from down to up hydraulically.

     PLC control to realize automatic shear

     Cooperate with the signal direct from the feeder and shear automatically

     Adopt gap adjusting design to cut the materials and can shear 4mm steel plate safely after heat treatment.

     The blade material:6CrW2Si

8. Transportation table  

     Transportation belt is skid proof and wearable

     Drive: cooperate with the line speed and is transmitted by 4KW frequency control motor 

9. Pneumatic stacker device

The plates are piled pneumatically and PLC controls the lifting.

Three 0.75kw motors drag to adjust the width and the length.

It is equipped with the wind device which cooperate with the high pressure fan to prevent the sheets from friction.

The length of plates can range from300-3000mm (which can be customized)

The width can be ranged from 500 to 1300mm. 

10. Hydraulic lifting table

The length of plates can range from400-3000mm (which can be customized)

The width cab be ranged from 500 to 1300mm. 

11. Exit coil car (2 cars)

Set horizontal discharge car, neat code sheet output production lines, to ensure the continuity of production of sheet metal.

Set the the cycloid gear motor output power.

12. Pneumatic system

The pneumatic system is composed of the air power(prepared by the buyer), air source treatment components , salennoid, relevant pipeline and air cylinder, etc. The components such as salennoids are adopted high quality products.

Technical parameters: stress of air source: 0.4-0.6Mpa. The capacity:1m³ /min.

13. Hydraulic system

 Power: 11kw, Ensure the using of every hydraulic part.

The working pressure of the hydraulic system is 6.3-16Mpa.

14. Electrical system

The whole line adopts PLC central control, be determined precisely by the servo motor to realize fixed length precisely, satisfy the required high precision of metal sheet.

Two control board, working methodadjust/manual/automatic

  FunctionSpeed adjust, length setting, shear counting, display control of cutting length, fault information display, system protection, and other functions.

 

If you need detailed parameters of the machine, please tell me the specifications of the sheet  you need to process, I will provide you with the data, to give you the technical solutions you need.


The main model you may select:


main model 

 

Online Inquiry:
Related products

5 ton hydraulic tilter(upender)

More>>
5 ton hydraulic tilter(upender)
High speed stainless steel cut to length line is mainly used for the stainless steel coil processing with deeply without burr of different length of steel plate. More>>
High speed stainless steel coil cut to length machine
This machine is used for plate leveling,It is strong, durable.


More>>
Leveler Machine Manufacturer