Automatic cold rolling slitting machine
Automatic cold rolling slitting machine is used to the longitudinal cutting for the steel coils and rewinding the slit strips into coils.
Advantages: Convenient to operate, high cutting precision and utilization factor of the material, adopts the infinitive speed.
About Cold Rolled Steel Slitting machine
Main technical parameters
Steel coil parameters | Material | CRS GI and so on |
Tensile strength | δb≤400Mpa,δS≤280Mpa | |
Steel thickness | 0.3-3mm | |
Steel width | 500-1600(Max) | |
Steel coil I.D | Φ508 mm/610mm | |
Steel coil O.D | φ1800mm(Max) | |
Steel coil weight | 20T(Max) | |
Slitter parameters | knife pivot diameter | Ф200 mm |
Knife pivot material | 40Cr | |
Blades specification | Φ200mmXφ340mmX10mm | |
Blade material | 6CrW2Si | |
Slit parameter | Max slit quantity | 8 pcs (3mm), 30 pcs(0.3mm) |
Width precision | ||
Other parameters | Power | |
Line speed | 0-120m/min | |
Capacity | 210 Kw | |
Whole line Dimension | 24m(L)X8m(W) | |
Operator needed | 1 mechanical engineer ,2 common workers | |
Line direction | From right to left(Face to machine) | |
Machine color | White grey |
layout
Composed device
No | Name | Quantity |
1 | Entry coil car | 1 unit |
2 | Hydraulic Decoiler | 1 unit |
3 | Hydraulic Press and pinch device | 1 unit |
4 | Hydraulic cutter | 1 unit |
5 | Looper 1 | 1 unit |
6 | Side guide device | 1 unit |
7 | Slitter | 1 unit |
8 | Scrap winder | 1 unit |
9 | Looper 2 | 1 unit |
10 | Tension stand | 1 unit |
11 | Recoielr | 1 unit |
12 | Exit coil car | 1 unit |
13 | Hydraulic system | 1 set |
14 | Electrical system | 1 set |
If you need detailed parameters of the machine, please tell me the specifications of the sheet you need to process, I will provide you with the data, to give you the technical solutions you need.
The main model you may select: