产品展示banner
Your current location: 首页 > Products > Slitting Line > Hydraulic slitting line > 1.5x1250mm thin plate sltting and cut length all-in-one machine
Cut To Length Line Slitting Line Slitting machine blade Leveler Tilter Flat Bar Machine
Automatical slitting line Hydraulic slitting line Simple slitting line

Hydraulic slitting line

1.5x1250mm thin plate sltting and cut length all-in-one machine

1.5x1250mm thin plate sltting and cut length all-in-one machine

This thin plate slitting and cut to length line machine can only slitting or cut to length orslitting and cut to length at same time.

We're here to helpEasy ways to get the answers you need.

Thin plate sltting and cut length all-in-one machine

It is controlled by servo electromotor and used to regulate for high speed feed and precise length control.

The operation is done at the control table with programmable control.

Drive model: 11Kw servo motor with precise decelerating transmission and synchronous to transport the belt to feed rollers.

Specification of bladesΦ200×Φ120×40 material6CrW2Si and 10 pieces of blades and rubber board will be provided with the machine for free, the blades can be moved. When not in use, the blade shaft can be lifted.

Thickness of process able materialδ0.2-1.5mm.

Width of process able materialB≤1250

The slitting machine is designed with entry guide device, press device  

Slitting speedv≤ 25m/min.

Shear model: cut from up to down electrical which is cooperate with the signal direct from the feeder and shear automatically.

Adopt gap adjusting design to cut the materials and can shear 1.5mm steel plate safely after heat treatment.

thin plate slitting and cut to length machine

Online Inquiry:
Related products

10x1600 Automatic steel slitting line is a line to slit the specific width coils, it includes decoiler, pinch and pre-leveling device, transition table, side guide device, slitter, scrap winder, looper, tension stand, recoiler and both entry and exit coil cars.


It can slit stainless steel, hot rollled steel, cold rolled steel and so on. It is designed strong and powerful enough to slit the 10 mm thickness steel.


We can customize the machine as per your specific requirements

More>>
10x1600 Automatic steel slitting line
We manufacture rotary slitter knives up to 1300mm(51.1811 inches) in outside diamter for slitting metal plates, coils etc.

Blades are available with ground, lapped or polished side faces.

Slitter knives are manufactured to a thickness tolerance of ±0.002mm-0.003mm(±0.00007 inch-±0.00012inch).

Parallelism tolerances is within 0.003mm (0.00012 inch) These are all prerequisites for the best possible slitting results.

Parallelism tolerances is within 0.003mm (0.00012 inch)

More>>
slitting blade

Flat bar cutting machine is a line which can do uncoiling, deburring, chamfering, straightening and cutting , to produce the high quality flat bar pieces.

More>>
Flat bar cutting machine