产品展示banner
Your current location: 首页 > Products > Slitting Line > Simple slitting line > 5(0.2-1.5)X650mm manual simple slitting line
Cut To Length Line Slitting Line Slitting machine blade Leveler Tilter Flat Bar Machine
Automatical slitting line Hydraulic slitting line Simple slitting line

Simple slitting line

5(0.2-1.5)X650mm manual simple slitting line

(0.2-1.5)X650mm manual simple slitting line

Slitting Line , called slitting machine or longitudinal cutting line, is used to uncoiling, slitting, recoiling the steel rolls into demand width steels. It can be applied to process the cold or hot rolled steel coil, Silicon steel coils, tinplate coils, Stainless steel and color coated steels. 


We're here to helpEasy ways to get the answers you need.

About(0.2-1.5)X650mm manual simple slitting line

 

 Main technical parameters 

 

NO.

Name                                                          

unit              

parameters                                       

        Control model


Frequency conversion control

        Materials


CRS/Galvanized steel coils

        Thickness

    mm

0. 2-1.5

        Width(max)

    mm

650

        Coil ID

    mm

508

        Coil OD

    mm

1400

        Weight

    T

5

        Blade specification

    mm

Φ220×Φ120×10

        Material of blade


6CrW2Si

10 

        Line speed

    m/min

≤40

11 

        Power of decoiler

    kw

5.5

12 

        Power of slitting

    kw

11

13 

        Power of recoiler

    kw

22

14 

        Quantity of strips

    pieces

6-15(1.5-0.2mm)


650 manual slitting machine 

layout

 650 manual slitting machine


650 manual slitting machine

650 manual slitting machine

650 manual slitting machine

650 manual slitting machine

650 manual slitting machine




 Composed devices

The flow of the process Uncoiling-- slitting-- Scrap—Pit—Tension stand— Recoiler

Manual expand and shrink un-coiler

1.Structurefour connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling.

2.SpecificationΦ520max/480min×700width of roller

3.4kw frequency conversion control to make sure the speed is adjustable and it is equipped with both passive and active uncoiling models

4.The max capacity: 5T .

 Storage pit 1

It should be done according to the foundation drawings

  Disc slitting machine

1.Specification of bladesΦ220×Φ120×10 material6CrW2Si and 20 pieces of blades and a set of spacers and rubber board will be provided with the machine for free, Details please check the spare parts list.

2.Thickness of process able materialδ0.2-1.5mm.

3.Width of process able material B≤650

4.Electric motor11KW frequency conversion control motor to control the speed.

5.The slitting machine is designed with entry guide device, press device.

6.Slitting speed v30m/min

 Scrap winder

It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and motor.

 Storage pit 2

It should be done according to the foundation drawings

 First pre-dividing and press device          

1. It is equipped with guiding and dividing devices after slitting.

2. It also designed with the tension press which is match to the recoiler and insures the even and tight quality of recoiler.

  Mechanical recoiler

1.Specification of shaftΦ510/470minx800

2.Capacity P≤5T

3.Motor22KW frequency conversion control motor.

4.Speedv40m/minaverage

 Second dividing and pressing device

1.This device cooperate with the recoiler to make sure the even quality and tight.

2.The spacers are 9CrSi alloy material with the quantity 30 pieces which will be separated on separated shafts .

 Electrical control case                       

It controls the speed of the whole line. The main operation table can make the whole line change from high to low speed. And it can also make the plate into the machine manually. 

If you need detailed parameters of the machine, please tell me the specifications of theheet you need to process, I will provide you with the data, to give you the technical solutions you need.

Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (Ton)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on :



Online Inquiry:
Related products
Slitting Line , called slitting machine or longitudinal cutting line, is used to uncoiling, slitting, recoiling the steel rolls into demand width steels. It can be applied to process the cold or hot rolled steel coil, Silicon steel coils, tinplate coils, Stainless steel and color coated steels.  More>>
400mm simple slitting machine
This machine is used for plate leveling,It is strong, durable.


More>>
High quality leveling machine
Hydraulic slitting line is equipped with the necessary hydraulic actions on the basis of the mechanical slitting line.Easy to operate with high automation and reduce the pressure on workers to improve the efficiency. More>>
0.2-1.5x1250 Hydraulic slitting line (Ground style not need pit)