产品展示banner
Your current location: 首页 > Products > Slitting Line > Simple slitting line > (0.2-1.5)x1250mm simple machanical slitting line
Cut To Length Line Slitting Line Slitting machine blade Leveler Tilter Flat Bar Machine
Automatical slitting line Hydraulic slitting line Simple slitting line

Simple slitting line

(0.2-1.5)x1250mm simple machanical slitting line

(0.2-1.5)x1250mm simple machanical slitting line

This steel slitting machine is easy to operate and convenient to maintain,with high quality but cheap price.We are one of the steel slitter machine manufacturer.Meet the end customer's own production needs.

We're here to helpEasy ways to get the answers you need.

 About (0.2-1.5)x1250mm simple machanical slitting line

 Main technical parameters 

NO.

Name                                                          

unit              

parameters                                      

       Control model


Frequency conversion control

2 

       Materials


CRS/Galvanized steel coils

       Thickness

   mm

0. 2-1.5

       Width(max)

   mm

1250

5 

       Coil ID

   mm

508

6 

       Coil OD

   mm

1400

7 

       Weight

   6T

5

       Blade specification

   mm

Φ220×Φ120×10

       Material of blade


6CrW2Si

10 

       Line speed

   m/min

≤40

11 

      Power of decoiler

   kw

5.5

12 

      Power of slitting

   kw

15

13 

      Power of recoiler

   kw

30

14 

     Quantity of strips

   pieces

6-15(1.5-0.2mm)

LAYOUT

steel slitting machine 

steel slitting machine 

Composed devices

The flow of the process Uncoiling-- slitting-- Scrap—Pit—Tension stand— Recoiler

Manual expand and shrink un-coiler

1.Structurefour connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling.

2.SpecificationΦ520max/480min×1300width of roller

3.4kw frequency conversion control to make sure the speed is adjustable and it is equipped with both passive and active uncoiling models

4.The max capacity: 6T .

Storage pit 1

It should be done according to the foundation drawings

Disc slitting machine

1.Specification of bladesΦ220×Φ120×10 material6CrW2Si and 20 pieces of blades and a set of spacers and rubber board will be provided with the machine for free, Details please check the spare parts list.

2.Thickness of process able materialδ0.2-1.5mm.

3.Width of process able material B≤1250

4.Electric motor15KW frequency conversion control motor to control the speed.

5.The slitting machine is designed with entry guide device, press device.

6.Slitting speed v40m/min

Scrap winder

It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and motor.

Storage pit 2

It should be done according to the foundation drawings

 l First pre-dividing and press device          

1. It is equipped with guiding and dividing devices after slitting.

2. It also designed with the tension press which is match to the recoiler and insures the even and tight quality of recoiler.

Mechanical recoiler

1.Specification of shaftΦ510/470minx800

2.Capacity P≤5T

3.Motor30KW frequency conversion control motor.

4.Speedv40m/minaverage

Second dividing and pressing device

1.This device cooperate with the recoiler to make sure the even quality and tight.

2.The spacers are 9CrSi alloy material with the quantity 30 pieces which will be separated on separated shafts .

Electrical control case                       

It controls the speed of the whole line. The main operation table can make the whole line change from high to low speed. And it can also make the plate into the machine manually.

  

 If you need detailed parameters of the machine, please tell me the specifications of the sheet you need to process, I will provide you with the data, to give you the technical solutions you need.

Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (Ton)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on


The main model you may select:

 


 

Online Inquiry:
Related products

Automatic metal slitting machine line is a complete line to slit the big steel coil into strips and then rewinding by PLC, it can slit various size you need. It can slit cold rolled steel, Galvanized steel, Stainless steel, Hot rolled steel, etc.

More>>
Automatic metal slitting machine line
This line is highly automatic with precision measuring, efficient production, reliable performance , easy operation and maintenance.
More>>
Hot roll uncoiling and slitting line
This machine is used for plate leveling,It is strong, durable.


More>>
High quality leveling machine