This 1250mm simple high precision is easy to operate and convenient to maintain,with high quality but cheap price.Meet the end customer's own production needs.
About (0.2-1.5)x1250mm simple slitting line
Main technical parameters
NO. | Name | unit | parameters |
1 | Control model | Frequency conversion control | |
2 | Materials | CRS/Galvanized steel coils | |
3 | Thickness | mm | 0. 2-1.5 |
4 | Width(max) | mm | 1250 |
5 | Coil ID | mm | 508 |
6 | Coil OD | mm | 1400 |
7 | Weight | 6T | 5 |
8 | Blade specification | mm | Φ220×Φ120×10 |
9 | Material of blade | 6CrW2Si | |
10 | Line speed | m/min | ≤40 |
11 | Power of decoiler | kw | 5.5 |
12 | Power of slitting | kw | 15 |
13 | Power of recoiler | kw | 30 |
14 | Quantity of strips | pieces | 6-15(1.5-0.2mm) |
LAYOUT
Composed devices
The flow of the process :Uncoiling-- slitting-- Scrap—Pit—Tension stand— Recoiler
Manual expand and shrink un-coiler
1.Structure:four connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling.
2.Specification:Φ520max/480min×1300(width of roller)
3.4kw frequency conversion control to make sure the speed is adjustable and it is equipped with both passive and active uncoiling models
4.The max capacity: 6T .
Storage pit 1
It should be done according to the foundation drawings
Disc slitting machine
1.Specification of blades:Φ220×Φ120×10 material:6CrW2Si and 20 pieces of blades and a set of spacers and rubber board will be provided with the machine for free, Details please check the spare parts list.
2.Thickness of process able material:δ=0.2-1.5mm.
3.Width of process able material :B≤1250
4.Electric motor:15KW frequency conversion control motor to control the speed.
5.The slitting machine is designed with entry guide device, press device.
6.Slitting speed :v=40m/min
Scrap winder
It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and motor.
Storage pit 2
It should be done according to the foundation drawings
l First pre-dividing and press device
1. It is equipped with guiding and dividing devices after slitting.
2. It also designed with the tension press which is match to the recoiler and insures the even and tight quality of recoiler.
Mechanical recoiler
1.Specification of shaft:Φ510/470minx800;
2.Capacity :P≤5T
3.Motor:30KW frequency conversion control motor.
4.Speed:v=40m/min(average)
Second dividing and pressing device
1.This device cooperate with the recoiler to make sure the even quality and tight.
2.The spacers are 9CrSi alloy material with the quantity 30 pieces which will be separated on separated shafts .
Electrical control case
It controls the speed of the whole line. The main operation table can make the whole line change from high to low speed. And it can also make the plate into the machine manually.
If you need detailed parameters of the machine, please tell me the specifications of thesheet you need to process, I will provide you with the data, to give you the technical solutions you need.
Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (Ton)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on
The main model you may select: