产品展示banner
Your current location: 首页 > Products > Slitting Line > Simple slitting line > 400mm simple slitting machine
Cut To Length Line Slitting Line Slitting machine blade Leveler Tilter Flat Bar Machine
Automatical slitting line Hydraulic slitting line Simple slitting line

Simple slitting line

400mm simple slitting machine

400mm simple slitting machine

Slitting Line , called slitting machine or longitudinal cutting line, is used to uncoiling, slitting, recoiling the steel rolls into demand width steels. It can be applied to process the cold or hot rolled steel coil, Silicon steel coils, tinplate coils, Stainless steel and color coated steels. 


We're here to helpEasy ways to get the answers you need.

About Precision strip steel simple slitting machine  for (0.2-1.5)x400mm

Main technical parameters 

NO.

Name                                                                           

unit                

parameters                                                  

Control model


Frequency conversion control

2 

Materials


CRS/Galvanized steel coils

Thickness

   mm

0. 2-1.5

Width(max)

   mm

350

5 

Coil ID

   mm

508

6 

Coil OD

   mm

1400

7 

Weight

   T

5

Blade specification

   mm

Φ220×Φ120×5

Material of blade


6CrW2Si

10 

Line speed

   m/min

≤40

11 

Power of decoiler

   kw

5.5

12 

Power of slitting

   kw

11

13 

Power of recoiler

   kw

22

14 

Quantity of strips

   pieces

6-15(1.5-0.2mm)


 

LAYOUT

400mm Simple slitting machine

400mm Simple slitting machine

400mm Simple slitting machine

400mm Simple slitting machine

400mm Simple slitting machine



Composed devices

The flow of the process :Uncoiling-- slitting-- Scrap—Pit—Tension stand— Recoiler

Manual expand and shrink un-coiler

1.Structure:four connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling.

2.Specification:Φ520max/480min×400(width of roller)

3.4kw frequency conversion control to make sure the speed is adjustable and it is equipped with both passive and active uncoiling models

4.The max capacity: 5T .

Storage pit 1

It should be done according to the foundation drawings

Disc slitting machine

1.Specification of blades:Φ220×Φ120×5 material:6CrW2Si and 20 pieces of blades and a set of spacers and rubber board will be provided with the machine for free, Details please check the spare parts list.

2.Thickness of process able material:δ=0.2-1.5mm.

3.Width of process able material :B≤350

4.Electric motor:11KW frequency conversion control motor to control the speed.

5.The slitting machine is designed with entry guide device, press device.

6.Slitting speed :v=30m/min

Scrap winder

It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and motor.

Storage pit 2

It should be done according to the foundation drawings

First pre-dividing and press device          

1. It is equipped with guiding and dividing devices after slitting.

2. It also designed with the tension press which is match to the recoiler and insures the even and tight quality of recoiler.

Mechanical recoiler

1.Specification of shaft:Φ510/470minx800;

2.Capacity :P≤5T

3.Motor:22KW frequency conversion control motor.

4.Speed:v=40m/min(average)

Second dividing and pressing device

1.This device cooperate with the recoiler to make sure the even quality and tight.

2.The spacers are 9CrSi alloy material with the quantity 30 pieces which will be separated on separated shafts .

Electrical control case                       

It controls the speed of the whole line. The main operation table can make the whole line change from high to low speed. And it can also make the plate into the machine manually.



If you need detailed parameters of the machine, please tell me the specifications of thesheet you need to process, I will provide you with the data, to give you the technical solutions you need.

Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (Ton)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on

The main model you may select:

Online Inquiry:
Related products
The machine can cut automatically. The line speed can be adjusted. It has a measuring with high precision and whole line can work automatically and operate easily, smooth sheet can be made. More>>
12x2000mm hot roll cut to length machine

Slitting Line , called slitting machine or longitudinal cutting line, is used to uncoiling, slitting, recoiling the steel rolls into demand width steels. It can be applied to process the cold or hot rolled steel coil, Silicon steel coils, tinplate coils, Stainless steel and color coated steels


More>>
5(0.2-1.5)X650mm manual simple slitting line
This production line is along the length direction of the coil material shear into deveral narrow coils with certain width,for after rolling welder pipe,cold bending foorming,stamping process. More>>
(0.3-3)x1600mm automatic metal slitting machine