产品展示banner
Your current location: 首页 > Products > Slitting Line > Simple slitting line > Precision strip steel simple slitting machine
Cut To Length Line Slitting Line Slitting machine blade Leveler Tilter Flat Bar Machine
Automatical slitting line Hydraulic slitting line Simple slitting line

Simple slitting line

Precision strip steel simple slitting machine

Precision thin steel strip slitting machine

The precision thin steel strip slitting machine is easy to operate and convenient to maintain,with high quality but cheap price.Meet the end customer's own production needs.

We're here to helpEasy ways to get the answers you need.

About Precision strip steel simple slitting machine  for (0.2-1.5)x400mm


Main technical parameters 

NO.

Name

unit

parameters

Control model

Frequency conversion control

2 

Materials

CRS/Galvanized steel coils

Thickness

mm

0. 2-1.5

Width(max)

mm

350

5 

Coil ID

mm

508

6 

Coil OD

mm

1400

7 

Weight

T

5

Blade specification

mm

Φ220×Φ120×5

Material of blade

6CrW2Si

10 

Line speed

m/min

≤40

11 

Power of decoiler

kw

5.5

12 

Power of slitting

kw

11

13 

Power of recoiler

kw

22

14 

Quantity of strips

pieces

6-15(1.5-0.2mm)

 

LAYOUT

Precision Thin steel strip slitting machine 

 Precision Thin steel strip slitting machine

Precision Thin steel strip slitting machine

Precision Thin steel strip slitting machine Precision Thin steel strip slitting machine

Composed devices

The flow of the process Uncoiling-- slitting-- Scrap—Pit—Tension stand— Recoiler

Manual expand and shrink un-coiler

1.Structurefour connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling.

2.SpecificationΦ520max/480min×400width of roller

3.4kw frequency conversion control to make sure the speed is adjustable and it is equipped with both passive and active uncoiling models

4.The max capacity: 5T .

Storage pit 1

It should be done according to the foundation drawings

Disc slitting machine

1.Specification of bladesΦ220×Φ120×5 material6CrW2Si and 20 pieces of blades and a set of spacers and rubber board will be provided with the machine for free, Details please check the spare parts list.

2.Thickness of process able materialδ0.2-1.5mm.

3.Width of process able material B≤350

4.Electric motor11KW frequency conversion control motor to control the speed.

5.The slitting machine is designed with entry guide device, press device.

6.Slitting speed v30m/min

Scrap winder

It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and motor.

Storage pit 2

It should be done according to the foundation drawings

First pre-dividing and press device          

1. It is equipped with guiding and dividing devices after slitting.

2. It also designed with the tension press which is match to the recoiler and insures the even and tight quality of recoiler.

Mechanical recoiler

1.Specification of shaftΦ510/470minx800

2.Capacity P≤5T

3.Motor22KW frequency conversion control motor.

4.Speedv40m/minaverage

Second dividing and pressing device

1.This device cooperate with the recoiler to make sure the even quality and tight.

2.The spacers are 9CrSi alloy material with the quantity 30 pieces which will be separated on separated shafts .

Electrical control case                       

It controls the speed of the whole line. The main operation table can make the whole line change from high to low speed. And it can also make the plate into the machine manually.

If you need detailed parameters of the machine, please tell me the specifications of the sheet you need to process, I will provide you with the data, to give you the technical solutions you need.

Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (Ton)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on 



Online Inquiry:
Related products
Hydraulic slitting line is equipped with the necessary hydraulic actions on the basis of the mechanical slitting line.Easy to operate with high automation and reduce the pressure on workers to improve the efficiency. More>>
0.2-1.5x1250 Hydraulic slitting line (Ground style not need pit)
This 650mm flat bar slitting machine is used in first slitting the big width coils into required small width flat bar coils,to prepare for further processing. More>>
(2-6)X650mm flat bar slitting machine
We manufacture rotary slitter knives up to 1300mm(51.1811 inches) in outside diamter for slitting metal plates, coils etc.

Blades are available with ground, lapped or polished side faces.

Slitter knives are manufactured to a thickness tolerance of ±0.002mm-0.003mm(±0.00007 inch-±0.00012inch).

Parallelism tolerances is within 0.003mm (0.00012 inch) These are all prerequisites for the best possible slitting results.

Parallelism tolerances is within 0.003mm (0.00012 inch)

More>>
slitting blade